tel

+86-371-56771821

tel

+86-135-2669-2320

FAQ

Contact Us
20TPD waste tyre to oil plant project was installed in Inner Mongolia, China
20TPD waste tyre to oil plant project was installed in Inner Mongolia, China

Latest used lube oil recycling technology-waste oil to diesel plant

With the rapid development of the transportation industry, a large amount of used lube oil is produced every year worldwide. Lube oil is the second largest petroleum product after fuel oil. After long-term use, mechanical lubricating oil will become used lube oil and become a source of pollution. The recycling of lubricating oil can not only prevent waste oil pollution, but also protect the environment. And it can also save man's limited petroleum resources at the same time.

refining of used lube oilsUsed lube oil

As the latest recycling technology, DOING waste oil to diesel plant is specialized in refining used lube oil into diesel and residue. Diesel is used in ships, generators, and various mining machinery, which is very easy to find the buyer for this diesel, thus reducing the difficulty of starting this business. The produced residue can be used as raw materials for asphalt production, which is used for paving roads, and the sales route is also convenient. This utilization method is one of the best solutions for recycling of used lube oil, due to the low investment and short capital turnover cycle.

used lube oil recycling processWaste oil to diesel plant recycling used lube oil to diesel and asphalt

DOING Machinery specializes in the manufacture of waste oil to diesel plant and has made great investments in equipment research and development. The latest refining equipment adopts a vertical reactor, which has the following advantages over the traditional horizontal reactor.

1.Speeding up the reaction time and shorting the reaction cycle within one day

In addition to the bottom heating, the vertical reaction reactor is also heated by heating transfer oil, and the heat transfer oil pipe is in the middle of the furnace body, which greatly increases the heat receiving area.

2. Convenient discharging method

In the traditional horizontal reactor, it is necessary to wait for the oil residue to be completely cooled before the slag can be discharged. The worker must enter the middle of the reactor to excavate. The whole process takes about 10 hours, and there is also a great safety hazard.

3. Saving fuel

The traditional horizontal reactor requires 3 to 4 days of reaction time, which requires uninterrupted heating and greatly wastes fuel. Since the vertical reactor’s reacting time is short, fuel is saved greatly.

waste oil to diesel plantWaste oil to diesel plant in Malaysia

The newly designed waste oil to diesel plant has won the praise of many customers, we will spare no effort to continue to improve our products, and look forward to your valuable suggestions.

Leave a Message about Latest used lube oil recycling technology-waste oil to diesel plant

YOUR NAME

YOUR PHONE

YOUR EMAIL*

YOUR CONTURY

ADDITIONAL NOTE(OPTIONAL)

Leave a message

Tel:+86-135-2669-2320